Drywall is recognized as the backbone of contemporary interior walls. However, true magic is in the details. Achieving a smooth, furbish corner elevates a room from functional to truly polished. It is possible to wonder, “How to repair drywall corners?” With the right approach and a pinch of patience, you can spare yourself hours of sanding and irritation. Sharp angles can be smoothed out to the last degree.
Corner Beads and Joint Compound
First, proper tools are necessary to create a perfect corner. Corner beads are thin strips of metal or plastic installed on the exterior edges of the drywall panels. These serve as a shield and guarantee a straight and smooth cut. Also, when selecting the corner bead, it is advisable to use a pre-bent one, as it will be easier to install.
A joint compound called mud is applied after corner beads are applied and fastened. This product fills joints, level surfaces, and receives the corner bead. The effectiveness of repairing drywall corners depends on how the mud is applied, and the following are the steps to follow. Inside corners require a thin layer of mud to be used on the joints to cover any gaps between the drywall panels.
The Art of Taping
The magic touch comes after the initial mud application on the inside corners: the drywall tape. This strengthens the joint and provides a flat surface for the subsequent mud coats. When taping the joints of the drywall, there are two options for the tape: paper or fiberglass mesh. Paper tape is easier to use for novices, while fiberglass mesh provides more strength and crack control.
Building a Smooth Foundation
Here is the dance with the mud. This is where technique comes in handy. With the help of a taping knife, spread a thin layer of mud over the drywall tape on both sides of the corner. Just a reminder: do not be too heavy-handed. It is recommended to apply the joint compound in thin, even layers that slightly run over the drywall surface. Allow this first coat to dry before applying the second coat.
This is repeated until the next layers of mud are applied with a slight feathering method. Feathering is the process of tapering the mud towards the corner, which makes a smooth transition from the corner to the surface of the drywall. This should be done until the last coat is applied, and each coat should be allowed to dry before the next is applied.
Sanding and Finishing Touches
After the last layer of mud has dried, dampen a fine-grit sponge or sanding block and lightly rub the corner and the adjacent area. Take your time, and do not press too hard on the surface, as this may cause a hole to be made.
After sanding, wipe the wall with a damp cloth to remove dust and paint it with a primer. This makes it easier to apply paint, provides a good ground for painting, and gives a perfect finish.
Let The Drywall Experts Handle Repairing the Drywall Corner!
Hoosier Boys Painting and Drywall mission is to educate their customers about proper painting practices. Our professional crew will share their passion for vibrant homes. So, don’t hesitate to reach out to the painting experts in Hobart, Indiana. Contact us today for a free consultation.
